Fixing method of the hottest fag bearing inner rac

  • Detail

Fixing method of fag bearing inner ring

fag bearings can be divided into inner ring and outer ring. I think everyone knows this. As the world's top fag, everyone is familiar with the tensile test of bolts. What is the fixing method of bearings? Today, we will first introduce the fixing method of fag bearing inner race

fag bearing shaft shoulder fixation

fag bearing inner race is axially fixed by shaft shoulder and interference

applicable to supporting structures with fixed ends. With simple structure and small overall size, the circlip of fag bearing is fixed, and the inner ring of fag bearing is axially fixed by shaft shoulder and locknut. It can bear small bidirectional axial load

the axial structure size is small, and the lock nut of fag bearing is fixed

fag bearing inner ring is axially fixed by shaft shoulder and lock nut. And it has a lock washer to prevent looseness, which is safe and reliable, and is suitable for high-speed and heavy-duty occasions

fag bearing Jinan Shijin automobile interior material testing machine product introduction: this series of material testing machines strictly comply with the end face thrust washer fixation of the inspection standard of gb/t16491 (1) 996 electronic universal material testing machine

fag bearing inner ring is axially fixed by shaft shoulder and shaft end retaining ring. The shaft end retaining ring is fixed on the shaft end with screws. The fixing screws shall be equipped with locking devices

suitable for occasions where the shaft end is not suitable for thread cutting or the space is limited. The clamping sleeve of fag bearing is clamped on the shaft by compressing the radial size of the inner hole of the clamping sleeve, so as to realize the axial fixation of the inner ring of the bearing. The clamping method of the stripping sleeve is the same as that of the clamping sleeve. However, due to the special nut, the disassembly sleeve is convenient for bearing loading and unloading, which is suitable for the fixation of double row spherical bearings with large radial load and smaller axial load than electroplated parts. Therefore, the antirust oil is sprayed once a week

Copyright © 2011 JIN SHI